Babbitt Bearings

Proven Bearing Material

Tin-based babbitt, also referred to as whitemetal, has long been a standard for oil-lubricated fluid film bearings.

Babbitt is a soft metal that exhibits excellent conformability, compatibility and embedability, allowing the bearing to bear the brunt of potential damage, instead of the more expensive shaft. It is considered a forgiving and rugged material and is widely used for both fixed profile and tilt pad bearings.

eff-combination-tilt-pad-bearing-006c
eff-thrust-pad-babbitt-lined-steel-backed
eff-thrust-pad-babbitt-lined-cucr-backed

Babbitt Backing

Babbitt bearings are more accurately babbitt-lined, with steel or copper chrome (CuCr) backing.

Due to the high thermal conductivity of copper chrome, CuCr-backed babbitt runs cooler and experiences less thermal distortion than steel-backed babbitt, thus increasing the bearing’s load capacity.

Depending on application requirements, steel and CuCr backing may both be used in the same bearing.

Babbitt Thrust Bearings

With non-equalizing and self-equalizing tilt pad designs, as well as fixed profile configurations, Waukesha Bearings delivers expertly engineered thrust bearing solutions.

Read More

eff-tpt-bearing-005-crop
eff-tpj-bearing-babbitt-003b

Babbitt Journal Bearings

Waukesha Bearings delivers babbitt bearings in sleeve and tilt pad configurations. Every bearing is optimized to application-specific performance requirements.

Read More

Advanced Material Options

As machine loads, speeds and temperatures increase, the main limitation for a bearing is frequently the bearing’s surface temperature. Typical industry practice is to limit the maximum operating temperature of babbitt bearings to 130°C (266°F) because babbitt loses strength at elevated temperatures.

Babbitt also has a relatively low fatigue strength compared to advanced materials. In extreme cases of dynamic loading, low fatigue strength can result in premature bearing damage.

Alternative fluid film bearing materials are available to accommodate more challenging operating conditions.

eff-tpt-bearing-alsn-pads-2a

Aluminum Tin (AlSn)

For oil-lubricated machines, AlSn bearings may provide a drop-in replacement for babbitt bearings, increasing temperature and load capability in the same bearing envelope.
eff-tpj-bearing-polymer-lined-004a

Polymer

Engineered polymers combine higher strength at elevated temperatures and higher fatigue strength than babbitt with embedability and conformability comparable to babbitt’s.
eff-hidrax-ht-tpt-bearing-wc-1a

Ceramic / Cermet

Ceramic and ceramic-metallic composites further extend load and temperature capabilities. Given their superior strength and hardness, ceramics and cermets can be used in applications with process lubrication.
eff-tpj-bearing-polymer-lined-008c

Intro to Bearing Materials

The selection of the bearing materials plays a significant role in the performance of fluid film bearings. Load, speed, operating temperature, insulation requirements, and lubricant type and cleanliness may all play into the material choice.

Download our “Introduction to Fluid Film Bearing Materials” for an overview of material characteristics, benefits and limitations in fluid film bearing use.

Download the White Paper